|
Impedance and Gain |
||
|
|
||
| These
directions tell you how to change the gain, input impedance and output impedance
of the Raleigh Audio line stage.
The directions are different for each version of the line stage: the legacy boards, the version 1 boards, and the version 2 boards. Some people have a mix: for example, a version 1 Combo Input with a version 2 Active Output. In this case, use the Mix instructions. |
||
|
|
||
| Legacy | These directions address changing the impedance and gain for the original version of the line stage. This version has one channel per board. | |
|
|
||
| Version 1 AO | These
directions address changing the impedance and gain for the version 1
Active Output with version 1 Combo Input. |
|
| Mark II | These
directions address changing the impedance and gain for the version 2
Active Output with version 2 Combo Input. |
|
|
|
||
| Mix | These
directions address changing the impedance and gain for the version 2
Active Output with version 1 Combo Input. |
|
| Home Articles page |
||